Chiller Systems

New chillers save more energy than older models, by about 20–30%*, with automatic cleaning that runs without shutting down

Win Win Supply (ESCO) provides energy conservation services for chiller systems, including automatic condenser tube cleaning (Ball Technic) and replacement with new, higher-efficiency chillers, so your building's cooling runs at full efficiency and long-term energy costs come down.

*Compared with older chillers. Actual results depend on the condition and age of the existing unit.

Certificate Trusted for our quality
100+ Projects
80+ Clients
50+ MW Installed capacity

What is a chiller and why maintain it?

A chiller is a central cooling system that sends chilled water through pipes to many parts of a building at once. As a large system that runs continuously, its efficiency directly affects the whole building's electricity bill. If condenser tubes build up scale or dirt, or the unit is old, it uses more power and costs more to maintain.

20–30%

Energy savings

New chillers have a lower kW per ton of cooling than older models, so they save more energy.

2

Our approach

Install Ball Technic automatic cleaning or upgrade to a new, higher-efficiency chiller.

3

Chiller types

Water-cooled, air-cooled and absorption.

Non-CFC

New refrigerants

Most new chillers use CFC-free refrigerants, which do not damage the ozone layer.

Benefits of maintaining and upgrading your chiller

Keeping your chiller at full efficiency, or replacing it at the right time, cuts electricity and maintenance costs and makes your building's cooling more stable.

1

Lower energy use

New chillers use less energy per ton of cooling than older models, saving about 20–30%.

2

Better heat rejection

Ball Technic prevents scale and biofilm in condenser tubes for the best possible heat exchange.

3

No shutdown needed for cleaning

Automatic cleaning while the unit runs, so your building's cooling is never interrupted.

4

Environmentally friendly

Most new chillers use CFC-free refrigerants that do not damage the ozone layer.

Energy conservation for chiller systems

Making a chiller energy-efficient starts with keeping heat rejection at its best, and judging when replacing the unit is better value than continuing to repair it.

  • Scale makes chillers use more power

    When scale and biofilm build up in condenser tubes, the unit rejects heat poorly and needs more energy to deliver the same cooling.

  • Ball Technic automatic cleaning

    Automatic condenser tube cleaning while the unit runs, stopping scale before it forms.

  • Assess the value of your existing unit

    If your chiller is old and expensive to maintain, replacing it may be better value in the long run.

  • Upgrade to a new chiller

    New units have a lower kW per ton of cooling, saving about 20–30% compared with units from 10–20 years ago.

Chiller services — who are they for?

Chillers suit large buildings that need to deliver cooling to many areas at once.

  • Buildings with water-cooled chillers that want condenser tubes kept clean at all times without stopping the unit.
  • Buildings whose chillers are old, increasingly costly to maintain or using more power than they should.
  • Large buildings with many areas that need central cooling delivered quickly to many points.

Compare to make the most cost-effective decision

Why upgrade your chiller system with Win Win Supply (ESCO)

A comparison between older, poorly maintained chillers and chiller systems upgraded and maintained by the Win Win team.

Existing chiller without upgrade

  • Scale and biofilm in the tubes, poor heat rejection
  • The unit must be shut down to clean the tubes
  • High kW per ton of cooling, higher power use
  • Maintenance costs rise as the unit ages

Chiller systems with Win Win Supply (ESCO)

  • Save about 20–30% on energy with a new chiller
  • Lower kW per ton of cooling than older models
  • Automatic condenser tube cleaning with Ball Technic
  • No shutdown during cleaning
  • Heat rejection as good as new, all the time
  • Choose models with CFC-free refrigerants
  • Careful installation planning for space, structure and unit position

How we upgrade chiller systems

Analyze your electricity use

Consultation

We learn about your existing cooling system, how it is used and your building's electricity costs.

Site survey and battery suitability assessment

Survey and assess equipment condition

We inspect the chiller and condenser tubes to assess current efficiency and maintenance costs.

System design and rental terms proposal

Recommend the best-value option

We advise whether to install Ball Technic or replace with a new chiller, based on the unit's condition and your budget.

Install, test and connect the system

Plan and install

We plan space, supporting structure and unit position before installation.

Performance monitoring and care throughout the contract

Test and hand over

We test the system before handover and advise on care for efficient long-term operation.

Frequently asked questions about chiller systems

Common questions about our chiller services

1. What types of chillers are there?
By heat rejection method there are three main types: water-cooled chillers, air-cooled chillers and absorption chillers, which use heat from steam in the cooling process.
3. Does the unit need to stop during cleaning?
No. Ball Technic cleans automatically while the unit runs, so your building's cooling is never interrupted.
5. How much can a new chiller save?
New chillers have a lower kW per ton of cooling, saving about 20–30% more energy than older models, and most use CFC-free refrigerants.
2. What is Ball Technic?
An automatic condenser tube cleaning system for water-cooled chillers. It prevents scale and biofilm, keeps heat rejection as good as new and improves chiller efficiency.
4. When should a chiller be replaced?
If a chiller is old and maintenance takes a lot of time and money, replacing it is usually the best value despite the investment, as new units are clearly more efficient than those from 10–20 years ago.
6. What are the installation constraints for chillers?
Chillers are large systems that need suitable installation space and a supporting structure, and are hard to relocate later. Our team helps plan the installation carefully from the start.

Ready to cut costs for your business?

Keep your chiller running at full efficiency for the long term and save energy

Free expert consultation! We analyze your energy use and design a solution that fits your business.

Get a free assessment